| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| The last drill press you’ll ever need... http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=9378 |
Page 1 of 1 |
| Author: | John Watkins [ Sat Nov 18, 2006 2:15 am ] |
| Post subject: | |
I was cleaning up some files and ran across this pic, so I thought I'd share. It belongs to a buddy of mine up the road. 5HP 3-phase 440v, automatic feed in 2-axis, 2 on-board coolant pumps, 8,500 lbs. DOM is around 1950. It'll accept bits up to about 2.5" in diameter and the runout is somewhere in the neighborhood of none. Enjoy! 
|
|
| Author: | Sam Price [ Sat Nov 18, 2006 2:36 am ] |
| Post subject: | |
That's a MOTHER!!!!! (also reminds me of the one I used to use during my CDT lesson high school days..  ) |
|
| Author: | Serge Poirier [ Sat Nov 18, 2006 4:14 am ] |
| Post subject: | |
Holy Schmowly! 
|
|
| Author: | martinedwards [ Sat Nov 18, 2006 4:17 am ] |
| Post subject: | |
why so small? |
|
| Author: | A Peebels [ Sat Nov 18, 2006 5:17 am ] |
| Post subject: | |
A freind of mine has one very similar to this one, it's definately a brute. Al |
|
| Author: | CarltonM [ Sat Nov 18, 2006 5:40 am ] |
| Post subject: | |
Hey, that drill press has my name written on it! Literally. |
|
| Author: | burbank [ Sat Nov 18, 2006 5:57 am ] |
| Post subject: | |
Do they make a benchtop model? Looks more like a stripped down mill than a drillpress! |
|
| Author: | Billy T [ Sat Nov 18, 2006 6:19 am ] |
| Post subject: | |
I used to work one like that! You could press frets with that Baby!
|
|
| Author: | tippie53 [ Sat Nov 18, 2006 7:31 am ] |
| Post subject: | |
If I hold the door open , can you carry it out ? john |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|